How to Clean Ninja Coffee Bar Easy Milk Frother?

To clean your Ninja Coffee Bar Easy Milk Frother, begin by unplugging it from the power source. After that, remove the frothing disk and lid and rinse them with warm soapy water. Then, fill a bowl with one part white vinegar to two parts water, submerge both pieces in the mixture and let sit for 10-15 minutes.

Once finished soaking, use a soft cloth to scrub away any remaining residue before rinsing again with warm water. Finally, dry all components thoroughly before reassembling your frother and plugging it back into an electrical outlet.

  • Unplug the Easy Milk Frother from the power outlet and let it cool down for at least 10 minutes before cleaning
  • Take out the frothing whisk and empty any contents in the jug into a bowl or mug, if needed
  • Make sure to wipe away any remaining milk residue with a damp cloth or paper towel before discarding it completely
  • Fill up the jug halfway with warm water and add a few drops of dish soap to create suds inside of it then put back the frothing whisk into its place securely on top of the lid handle
  • Place your finger over the opening in lid while holding onto both sides firmly then shake vigorously for several seconds until you see bubbles forming inside of frother
  • 5
  • Drain out all soapy liquid through spout using a small cup and rinse it off multiple times with fresh water until no more bubbles appear in container
  • 6
  • Wipe away any leftover moisture from outside surface area of coffee maker using clean dry cloth or paper towels after draining out all liquids
  • 7
  • Finally plug-in Ninja Coffee Bar Easy Milk Frother back into power outlet when done cleaning, so that you can enjoy your favorite espresso drinks again!
How to Clean Ninja Coffee Bar Easy Milk Frother?


How Do You Clean a Ninja Milk Frother?

Cleaning your Ninja milk frother is important to ensure that you get the best tasting foam. To clean it, first fill a cup with warm water and then add a few drops of mild detergent. Place the whisk attachment into the cup and turn on the frother for 10 seconds until bubbles form.

Then rinse off all soap residues by turning on the frother again with just plain water for another 10 seconds. Finally, place both parts of your Ninja milk frother onto a kitchen towel or paper towels to dry before putting them away.

How Do You Run a Clean Cycle on a Ninja Coffee Bar?

Running a clean cycle on your Ninja Coffee Bar is an essential part of maintaining its performance. To start the process, fill the water reservoir with fresh, cold tap water and add one scoop of Ninja Coffee Bar Cleaning Concentrate to it. Turn off any other heating elements and press the CLEAN button on your machine.

The cleaning process should take approximately 8 minutes and will involve a few rinses before completing. Once done, discard all used water from your coffee bar’s carafe or mug and rinse out any remaining detergent residue. Finish by running two full tanks of fresh cold tap water through the machine to ensure all residues are gone before making coffee again!

Can You Put Ninja Frother in Dishwasher?

No, it is not recommended to put the Ninja frother into a dishwasher. The high temperatures and harsh detergents used in dishwashers can damage the plastic components of your frother and degrade its performance over time. Additionally, using a dishwasher could potentially cause water to leak from your frother or even ruin the motor of your device.

To clean your Ninja Frother, gently scrub with warm soapy water after each use and rinse thoroughly before placing back on its stand for storage.

How Often to Clean Ninja Coffee Maker?

The Ninja coffee maker should be cleaned at least once a month to ensure that it is consistently making great tasting coffee. Make sure to follow the manufacturer’s instructions for cleaning your specific model. Generally, you will need to empty and rinse out the carafe after each use and clean the exterior of the unit with a damp cloth.

Then, every few weeks or so, run a brew cycle with just water added (no ground coffee) followed by vinegar solution in the same manner as if it were adding ground coffee. Finally, run another brew cycle with plain water only before resuming normal use. Cleaning your Ninja regularly will help keep it running its best and make sure your coffee tastes as good as can be!

Using the Ninja Easy Frother™


In conclusion, cleaning your Ninja Coffee Bar Easy Milk Frother is an essential part of making sure you have the best coffee-making experience. Taking the time to follow these steps for proper maintenance and cleaning will keep your frother in great condition and help it last longer. Cleaning this device is easy, fast, and straightforward when you follow these instructions.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top