Bodum 1446-01Us4 Latteo Manual Milk Frother Not Working

If your Bodum 1446-01Us4 Latteo Manual Milk Frother is not working properly, the first thing you should do is to check whether all of the components are intact and operational. Make sure that the lid and seal are in place, as well as any other loose parts such as screws or clips. If everything looks good but it still isn’t working properly, then you may need to clean the frother by following instructions from the user manual.

This includes taking off all removable parts and cleaning them with soapy water before putting them back together again. If this doesn’t fix the problem then there may be an issue with a faulty component or motor within your frother which will require professional repair services to resolve.

Bodum LATTEO Glass Milk Frother review

If you purchased the Bodum 1446-01Us4 Latteo Manual Milk Frother and it’s not working as expected, you may be feeling frustrated. Fortunately, there are a few steps you can take to troubleshoot the issue before having to contact customer service. First, make sure that all parts of your frother are securely attached and properly assembled.

If everything looks good on that front, try unplugging and replugging the device or replacing any batteries if applicable. If these efforts don’t bring about a solution, then contacting customer service for further help is your next best bet.

Bodum 1446-01Us4 Latteo Manual Milk Frother  Not Working


How Do You Get the Bodum Milk Frother to Work?

To get the Bodum milk frother to work, first ensure that it is properly plugged in and turned on. Pour some cold or room temperature milk into the jug up to the recommended level indicated on the side of it. Insert the plunger gently into the jug and press down until you hear a clicking sound.

This indicates that your frother has been activated and is now ready for use. Start by pressing down slowly at first, then gradually increase speed as you continue to plunge until foam begins to form. Once desired consistency has been reached, remove from heat source (if necessary) and enjoy your creamy coffee!

Why is My Milk Frother Not Working?

If your milk frother is not working, there are a few potential causes. First, make sure the power cord is properly plugged in and that the outlet has power. If it still does not work, check for any blockages or clogs in the tube leading from the motor to the frothing wand.

If this does not resolve your issue, you may need to replace some of its internal components such as a worn out pump motor or faulty wiring. It’s also possible that too much air was introduced into the system when adding milk resulting in an insufficient vacuum being produced by the machine. Finally, if all else fails contact customer service for further assistance with troubleshooting and finding replacement parts if needed.

How Do You Use a Bodum Manual Milk Frother?

To use a Bodum manual milk frother, start by filling the container with cold or warm milk. Pour in your desired amount of liquid, up to the fill line indicated on the side. Next, hold down the lid and firmly press down on the plunger until it reaches its lowest point.

Then, pump vigorously back and forth for 30-60 seconds until you see thick foam forming at the top of the container. Finally, remove from heat source if using hot milk and pour into your favorite coffee drink! Enjoy!

How Do You Clean a Bodum Handheld Milk Frother?

The best way to clean a Bodum handheld milk frother is to first disassemble it and remove the whisk head. Place all parts in warm, soapy water for about 5 minutes, then rinse thoroughly with clean water. You can also use vinegar or baking soda mixed with water as an alternative cleaning solution.

After rinsing, make sure you dry each part completely before assembling back together and storing away. Additionally, after every few uses you should take apart the frother again and check the seals for any signs of wear or damage that may affect its performance.


Overall, it appears that the Bodum 1446-01Us4 Latteo Manual Milk Frother is not working properly. This can be a frustrating experience as users expect their devices to work as expected. It is important for customers to contact customer service if they are experiencing any difficulties with this product.

They may be able to provide further advice and assistance on how to resolve the issue. Additionally, in some cases, these products come with a warranty which could allow for repairs or replacements at no cost to the customer.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top